How to connect hp officejet pro 8600 wireless to mac?

Connecting your HP Officejet pro 8600 Printer Wireless Printer

Pre-requisites

·         A temporary USB connection is required from printer to computer

·         Follow the instructions to connect and configure the printer’s wireless connection.

·         Connect and disconnect the USB cable when prompted by the software.

HP Oj pro 8600 Printer Setup of Wireless

·         Follow the on-screen instructions

·         In Connection type Wizard select USB as the preferred connection type.

·         Then select “Yes, send my wireless settings to the printer (recommended)”

·         The software would automatically discover your wireless setting and your printer should be ready.

·         Note: If this is your first printer installation, the software might be unable to find the printer network. Browse through the instructions to create a wireless connection to the printer

HP Officejet pro 8600 Printer Wireless Printer Setup

Pre-requisites

·         Ensure that your printer has a touch display

·         Ensure that you know your network name and your security password (WEP, WPA, or WPA2).

Set-up Wizard

·         Run from the Printer’s control panel

·         On the Printer’s control panel, navigate to the Network menu or touch the wireless icon and then go to Settings

·         Select the HP officejet pro 8600 Wireless Setup wizard

·         Follow the on-screen instructions till the Connection Option window displays

·         In Connection type Wizard select Wireless or Ethernet as the preferred connection type.

·         Then select “Yes, send my wireless settings to the printer (recommended)”

·         Note: Internet might get disconnected temporarily during the above process

·         Follow the on-screen instruction to complete the setup

HP Officejet pro 8600 Printer Wi-Fi Protected Setup

WPS has two modes to connect devices together over a wireless connection. One is called “pushbutton” and the other is called “PIN”. This setup details the pushbutton mode

Pre-requisites

·         Ensure that your printer and wireless router supports WPS pushbutton mode

·         Wireless router must have a physical WPS pushbutton available

·         Your network must use WPA or WPA2 security

Connecting your wireless printer to your wireless router using WPS Pushbutton method

·         Enable the WPS push button mode on your printer.

·         Note: Kindly check printer manual to locate this function as it may differ from model to model.

·         Press the WPS button on the Router

·         Note: This has to be done within 2 minutes, once the WPS option is enabled on the printer.

·         Press the Setup button and choose the Network menu option on the printer’s Control Panel.

·         Choose your Wireless Network’s name from the list or add Network’s name manually.

·         Enter your password.

·         Note: Password is Case-sensitive.

·         Your printer should be ready by now, if not find the issue by printing the Wireless network report.

Click here For HP Oj Pro 8600 Printer Installation