How to Install HP Officejet 4630 Setup for the first time?
HP Officejet 4630 Setup for the first
time
When setting up the printer for the first time, do read the manual
properly. You need to carefully unbox the printer and take out all the all tape
and packing materials from the outside and inside of the printer and remove all
the tape and packing materials from the ink cartridge access area.
·
Load the ink cartridges. Carefully close the ink
cartridge door till they snap into their places and is secure.
·
Push the paper tray into position.
·
Plug the printer into power source and turn it on.
·
On the control panel select the language and Set
Country/Region. Set your preferences and click on to yes.
·
Follow the instructions on the control panel that
will prompt you to start the ink cartridge alignment. The printer then aligns
the ink cartridges and prints an alignment page.
·
Press and hold the Wireless Button on the printer.
The wireless light would now start to blink.
·
Select HP Officejet 4630 WPS pin (Wi-Fi protected
Setup) on your wireless router. HP Officejet 4630 wireless setup will
initialize and it will take around 2-3 minutes to finish.
HP Officejet 4630 Wi-Fi Setup With
Windows 10 Mobile
·
Make sure that the printer, router and your
computer should be switched on and connected to the same wireless network that
you want to connect the printer to.
·
Go to the HP Officejet 4630 Wi-Fi setup on your
Windows 10 Mobile device then connect it to you wired or wireless network.
·
Open the file that you need to print.
·
Click on the print icon that you will see.
·
Once you click on the print icon a print preview
page will pop up, it prompts you to make any changes if needed.
·
Once the changes are made click on to print.
How to cancel print job with Windows
10 Mobile
·
By clicking the Print icon go to print queue on
your Windows 10 mobile.
·
Swipe down to the display, the current print jobs
will be displayed.
·
Select the print job that you wish to cancel and
then tap. It will be cancelled.
Printing with AirPrint
·
Make sure that the printer and the Apple iOS device
must be on the same local network.
·
On the Firmware look for HP Officejet 4630
AirPrint.
·
Now click Installed Personalities choose Options
you will find AirPrint.
·
You have the option to choose any print.
Click Here for 123.hp.com/oj4630
It is really very helpful for us and I have gathered some important information from this blog.
ReplyDelete123 hp oj4630 Setup